Build the connection between your servo drive and motor around your machine. OUKETECH manufactures servo motor cable assemblies and encoder feedback leads to your drawing, pinout, and routing requirements.
For OEMs and machine builders sourcing pre-terminated cables for a new design, pilot build, or repeat production.

Specify cut length, connector orientation, strain relief, and labels. Pre-terminated ends reduce the wiring and identification work at the machine.
Specify braid, foil, drain wire, or backshell bonding around the drive manufacturer’s grounding requirements and the approved assembly drawing.
Choose materials around fixed routing, cable-carrier movement, or robotic motion. Provide bend radius, travel, and torsion requirements so the build can be reviewed for the actual duty.
A custom servo motor power cable connects the drive output to the motor. Share the drive and motor models, electrical load, and termination details so we can review conductor size, cable length, and connector fit.
Define the current, voltage, conductor count, and protective-earth termination from the equipment requirements.
Provide the brake circuit and pinout. The brake conductors can be reviewed as part of the power assembly or as a separate lead.
Confirm mating part numbers, straight or angled exits, keying, and installation clearance at both ends.
An encoder cable assembly connects the motor’s feedback device to the drive. To specify a servo feedback cable, provide the encoder interface, pin-to-pin assignment, and drive-side termination details.
Include the encoder model and interface, such as incremental or absolute feedback, along with the manufacturer’s wiring requirements.
Define pair assignments, supply and return conductors, and any required cable impedance or capacitance limits.
Specify the shield path and bonding method at each end. Review our custom shielded cable assemblies for connector and backshell options.
Specify servo motor cables for axis drives, with connector exits and jacket materials suited to the enclosure, routing, and expected exposure.
Define fixed and moving sections separately. For dress packs, torsion, and other moving interconnects, see our robotics cable assemblies.
Order matched power and feedback leads for multi-axis equipment. If the build also needs PLC, sensor, or control-panel wiring, see our control cable assemblies.
Work with the manufacturing team to check mating parts, pinout, connector clearance, and assembly tolerances before approving the build.
Start with a sample to check fit, routing, and installation. Use the approved drawing and BOM to carry the same configuration into pilot and repeat orders.
Define the continuity map, short-circuit checks, and visual inspection criteria with the drawing. Include any insulation, dielectric, or documentation requirements in the RFQ so they can be reviewed before quotation.
Yes. Send the motor and drive models and the drawings for both assemblies. We can review lengths, terminations, and labels together so each lead is identifiable during installation.
Send the cable part number, equipment models, and any available drawing, pinout, or sample. We review the mating interfaces and wiring before quoting a build.
Send the drive and motor specifications for your single-cable system. Engineering can review connector pin assignments, shielding, and construction against the specified interface.
Provide the installation type, minimum bend radius, travel, speed, acceleration, any twist, and the target service life. Include oil or coolant exposure where applicable.
Send your drawing, BOM, or cable sample reference. For the most useful quote, include:
Submit your project through the OUKETECH inquiry form. For related interconnects, explore our custom cable assembly manufacturing.